24-volt heated hose ECO

277.00

This is ThermoBar’s heated hose for ThermoBar 65 ECO. ThermoBar’s heated hose simplifies supplying your animals with
water in the winter. The system is insulated and heated so the hose can be used in temperatures down to approx. -40°C
without freezing. With a quick connector and a plug it is easy to mount the hose and also easy to disconnect it when the
ThermoBar needs to be cleaned or moved. Together with ThermoBar’s Rojo float valve you have automatic refilling all
year round.
It is possible to use several water sources with spiral hoses and move the ThermoBar and heated hose between them. As the
system only uses 24 volts to heat the hose, it safely keeps water from freezing. If there is a power outage and it does freeze,
it will thaw fast once power is on again. With the float valve under the surface of the heated water, the entire system is
weather proof.
NB – When you have animals and electricity together, it is important that you only use low voltage, 24 volts. If the system
somehow gets damaged, remember that water conducts electricity. We STRONGLY advise against using 230-volt water
refilling systems in our ThermoBars due to the risks involved for the animals.
Suitable for ThermoBar 65 ECO.
Suitable for Rojo float valve.

In stock

SKU: VS-ECO Category:

Description

The heated hose is connected with a quick connector to the float valve. The other end is connected to a spiral hose with a
quick connector or connected directly to the DN 20 with the internal thread. To connect to a power source we have a
specialised solution: The heated hose’s low-voltage cable is connected with a flat pin plug to ThermoBar 65 ECO’s
transformer. On the low-voltage cable there is an extra socket. The ThermoBar’s low-voltage cable is connected here. It is
simple to do yourself, just watch the video below so it is clear which low-voltage cable is connected where.
Included in the price:
2.5 metre heated hose with metal connections and flat pin plug.
1 hose connection, the male connector part to replace the part in the ThermoBar’s Rojo float valve
1 insulation ring to go around hose attachment
1 cable tie
1 plug
1 cover plate
4 screws for the cover plate
Installation manual (Pdf)

Additional information

Weight 3 kg
Inner hose

PEX, DN15

Protective hose

PA, 54/44

Insulation

Foam PE, 10mm thick

Trace heating wire

Copper wire, PTFE insulated

Heating capacity

3 watt + 5 watt/metre, standard 15 watt, 24 volt.

Standard length

2.5 metres + 0.1 metre uninsulated connection point

Connection inlet

R15, external thread, or quick connector to spiral hose

Connection outlet

Quick connector to the ThermoBar, DN15 for ThermoBar 130 and DN20 for ThermoBar 80 DP and ThermoBar 250. Only the loose handles are different between the connections.

Connection materials

Brass and chrome-plated brass

Flow with Rojo valve

About 15 litres/minute with 5 bars of pressure.

Guarantee

3 years

Reviews

There are no reviews yet.

Be the first to review “24-volt heated hose ECO”

Your email address will not be published. Required fields are marked *

* Checkbox GDPR is required

*

I agree