Valve package


Automatic system for ThermoBar 30 with a magnetic valve.
ThermoBar’s valve package is designed to be used with a ThermoBar 30 or a ThermoBar 30 ISO for manually controlled
water refilling. The valve is mounted on a connection pipe above the box stalls in heated stables or on a frost-free pipe in
unheated stables or box stalls.
The valve is closed but opens using a 24-volt current, normally from a transformer. When the valve closes, the vertical pipe
down to the ThermoBar empties. The valve package comes with a control box with cable to a distribution box or as an
alternative a cable to both the transformer and valve. When installing without a distribution box the connections use blade

In stock

SKU: VENT Category:


The valve package includes:
1 valve ACL W106BV30
1 filter
1 power connection L49700601 to the valve with an approx. 10cm-long cable
1 transformer 20 VA for connection in a 230 V socket and with a two-metre cable with blade connectors.
1 control box with a two-metre cable to connect to the distribution box, alternatively 1 control box with an approx. 10cm-
long black/red cable with flat-pin plug (for the transformer) and black/black cable with blade connectors (for the valve).
The valve has inflow and outflow with internal thread R8. It can be suitable to use two nipples R8/R15 to connect down to a
compression fitting to a vertical pipe in DN15 copper, respectively up to a distribution pipe. Make sure you note the flow
direction of the valve! At the in-flow, there is a filter to protect dirt getting onto the valve. Use thread seal tape in the
connection, so it is possible to easily open it to clean the filter. Also keep enough space so you can detach the valve in case
it needs servicing at any point.
The control box has a reset button to/from and a signal light that is activated when refilling is underway. After the
transformer, all voltage is 24 volts and safe for people and animals. Protect cables with a cable protector that is properly
fastened to the wall. The vertical pipes will also need to be safely fastened to the wall so they can’t be damaged by the
horses. The control box can be mounted outside the box stall or protected behind a barrier.


There are no reviews yet.

Be the first to review “Valve package”

Your email address will not be published. Required fields are marked *

* Checkbox GDPR is required


I agree